VooPoo Drag S Pro Mod Pod Vape Kit

VooPoo Drag S Pro Mod Pod Vape Kit

The vast chasm between max-VG juices and salt nic juices is dividing line in the vaping industry. There are pod mods, such as the Smok Nord 4, which offer a selection of coils for both styles of vaping. The pickings are much slimmer when dealing with 510 threaded vape mods. In fact, you must never vape salt nic juices at high-wattage settings out of sub-ohm tank. The vapor production is exponentially greater than a vape pod kit and extremely deleterious.

Yet the Voopoo Drag S Pro Starter kit attempts to bridge this gap. The TPP coil family has plenty of cloud chasing and fire breathing options. But the 0.3ohm TPP coil is rated for 32 to 40 watts. This is too stiff for a 50mg salt nic juice but might be a viable option for those using less potent formulas. Especially since the coil itself fires easily at settings below 30 watts.

The Voopoo Drag S itself is a beautiful device. Rich leather insets make it easy to grip. The 3000mAh built in battery keeps it lean and easy to handle. The TFT screen measures nearly an inch and contains all the information you need to optimize your vaping experience.

With between 5 and 80 watts, you can get plenty of flavor and vapor from the four TPP coil designs. Few 510 threaded sub-ohm tanks provide anywhere near this level of flexibility.

Voopoo Drag S Pro Starter Kit Features:

• Threaded 510 Connection
• Magnetic Pod Connection
• 5.5mL Tank Capacity
• 3000mAh Integrated Battery
• 0.96" TFT Display Screen
• Power Range: 5 to 80 watts
• Compatible with VOOPOO TPP Coil Series
• GENE.FAN 3.0 Chipset
• Dimensions: 125.5 x 34.5 x 28.8mm
• Voltage Output Range: 0 to 8.5V
• Resistance Range: 0.1 to 3.0ohm
• Smart Mode, RBA Mode, Downloadable Temperature Control Mode
• Zinc-Alloy Frame
• No-Slip Leather Insets
• Ergonomic Firing Button
• Dual Button Menu Navigation
• 360-degree Airflow Control Slot
• Locking Side Fill System
• Leak Prevention Technology
• 0.15ohm TPP-DM1 Mesh Coil
• 0.3ohm TPP-DM4 Mesh Coil
• Press-Fit Coil Installation
• Overtime, Overcharge, Max Power, Over Discharge and Output Protections
• USB Type-C Port

Voopoo Drag Pro S Starter Kit Includes:

• 1 DRAG S Pro Device
• 1 5.5mL TPP-X Tank
• 1 0.15ohm TPP-DM1 Mesh Coil
• 1 0.3ohm TPP-DM4 Mesh Coil
• 1 Type-C Cable
• 1 User Manual

Voopoo TPP Pod Tank

The Voopoo TPP Tank is the a true Pod Tank. Or a Mod Pod as Voopoo prefers to call it. It can function as both a pod, connecting with a magnet to the Drag S or Drag X. But an adapter with 510 threading makes it compatible with a standard vape mod. It holds 5.5ml of e-liquid . Firing and ramp up speed are not compromised by this design, which really is the best of both worlds.

Voopoo TPP Coil Series

• 0.15ohm TPP-DM1 Coils - rated for 60-80W
• 0.2ohm TPP-DM2 Coils - rated for 40-60W
• 0.15ohm TPP-DM3 Coils - rated for 80-100W
• 0.3ohm TPP-DM4 Coils - rated for 32-40W

Voopoo TPP Coils feature a mesh heating element design that unlocks amazing flavor and generates rapid heating. This means flavorful vapor from start to finish. Press fit coils, there are four TPP coil designs that are compatible with the Voopoo Drag S Pro. The Drag S is sold with two, discussed above, these are the 0.3ohm DM4 TPP coil which is perfect for e-juices with greater nicotine strengths and for vapers who prefer a more restrictive vaping experience out of a versatile vape mod. The airflow controls of the Voopoo Drag S Pro make this seemingly impossible ask a possibility.

The 0.2ohm DM2 TPP coil is an optional coil, it splits the difference between the higher-resistance 0.3ohm coil and the cloud chucking monsters at the low resistance end of the curve. It works best between 40 and 60 watts. A step further in the cloud chucking direction is the 0.15ohm TPP DM1 Coil. It operates best between 60 and 80 watts. At the steep end of the vapor production curve is the TPP DM3 0.15ohm coil. It is designed to operate between 80 and 100 watts. The Voopoo Drag Pro S only can hit the low-end of this power range.